Best Starlink Mount Options (Satellite Dish Mounts)

Starlink Mount Options

Did you purchase the Starlink satellite internet kit only to discover that the kit and base could not provide you with full service? Choosing the right Starlink mounting option will do the trick.

As previously stated, your Starlink Kit comes with a base that is suitable for ground-level installation or a quick setup to test your connection. However, it is not a long-term solution for most people, so many Starlink users are looking for alternative ways to mount the satellite dish in a specific location.

While having a variety of options may seem ideal, let’s be honest: it can be confusing. How do you choose a mount that is installed in different places or one that is installed differently? Keep on reading!

List of Starlink Satellite Mounting Options 2022

  • VMP PRM-2 – Best Non-Penetrating Pitched Roof Mount

Different Types of Starlink Roof Mounting Kit


The J-Mount is one of the most popular Starlink mounting options. They’re readily available, inexpensive, and incredibly adaptable.

To connect with the Starlink mounting tube, the J-Mount solution requires some modest changes. The easiest way to secure the Starlink dish to the J-Mount is to use u-bolts or pipe clamps. You can also drill a hole and use a bolt and nut to replace the original Starlink dish mounting tabs.

To firmly secure the Starlink mast, you may require some spacer material or a bolt, depending on the interior diameter of your J-Mount. It will suffice to use electrical tape.

Flashing Mount

A Flashing Mount is installed beneath the top layer of shingles and secures the roof structure to provide a very strong and leak-free solution. In addition, you have to buy the volcano mount, which is then meant to be placed on top.

With the flashing mount, you can put your sealant in the middle and make sure it is extra sealed.

Non-Penetrating Roof Mount

If you are someone who does not want to attach a roof mount to the structure, go for the non-penetrating roof mount. However, because these mounts are weighted down and are not attached to the roof if you are in an area with high winds, you will need a model that can take more ballast to hold it in place.

Pole and Tower Mount

There are multiple cases where you need to mount your dish away from the home – that is when Pole Mount provides a solution to these difficult circumstances.

One of the major advantages of tower mounting is that you do not have to buy anything else extra. However, it is quite tall and not appealing to look at, not only that, but tower mounts are the most expensive Starlink mounting options.

Tripod Mount

Consider using something like a Heavy-Duty Tripod Base if you want to install your Starlink dish on a flat surface but need more height than a J-Mount provides. 

Tripod mounts can be used for both temporary and permanent installations. For a stable temporary mount, stake the tripod directly into the ground. Alternatively, perhaps you have a flat roof to which you can permanently secure it.

However, there is a risk of the Tripod Mount tipping over in windy conditions unless it is secured.

Chimney Mount

When you need some extra height, a chimney mount is ideal. Most people use this method when the roof structure or material does not allow for traditional installations.

However, keep in mind that installation may be a bit more difficult than with other options.

8 Best Starlink Mount Options

1. Winegard DS2000A

The Winegards DS-2000A is a simple and cost-effective way to add compact off-air antennas to your digital satellite system, which can be used either on the side of a house or the roof.

It is easily adaptable to many different pole installations, thanks to the included U-Bolts, and if you want some extra length, the galvanized steel is 22″ extra long.

The Winegard is compatible with satellite TV and internet antennas, as well as over-the-air TV antennas, outdoor Wi-Fi extenders, and weather stations.

I think we can all agree that one of the biggest problems regarding antennas is the weather resistance and how they can hold up to it. The Wingard is E-coated, so you can get maximum weather resistance. 

2. Ubiquiti Universal Mount (UB-AM)

The Ubiquiti Antenna mount is one of the easiest to install antennas you’ll find on the market. The pole itself can be mounted either way, and antennas can be mounted at a variety of different angles and distances from a building.

Although the mount is not particularly large, the bracket is enormous, which is something to note if not mounting on a wall/flat surface. Overall, this antenna mount seems very solid and is long enough to securely mount both my access points. 

However, many customers have complained that it constantly disconnects if the distance is not close and takes 30 minutes to reconnect. 

3. Commdeck Satellite Dish Mount

If you are primarily concerned with hiding wires, try Commdeck Satellite Dish. However, if your concern is avoiding roof damage, maybe you need to try something else. Even though it is a flashing mount, you still have to drill into the roof with screws to hold the plate. You also have to cut sections of the shingles off, so you might as well have a professional install the dish. 

Installing on a truss is critical. A professional installation will be far more reliable than putting it on this product that is only held up by small Philips head screws.

One of the selling points of the mount is that it supports dishes 18- 36” offering exceptional strength and adjustability and a universal hole pattern allows for use with standard Dish Network, DirecTV, Wild Blue, and High-Def antennas. 

4. VMP PRM-2 Non-Penetrating Roof Mount

The PRM-2 is the ideal mount when mounting the standard dishes directly to the roof is not possible. This heavy-duty mount is simple to assemble and comes with an adjustable mounting plate for precise satellite dish placement.

It accommodates 18 in. and 24 in. DBS/DSS antennas and can hold up to eleven 8-inch anchors. x 8 in. x 16 in. standard concrete blocks;

The PRM-2 is a non-penetrating roof mount, so it is designed to mount satellite dishes on a pitched roof without the need for penetration. 

However, for your own sake, you should purchase a “pad” to place between this and the roof.

The installation itself is pretty easy, so you could definitely install it yourself.

5. Rohn 25 Series 40′ Tower (25G)

ROHN 25G Towers are built with high-strength steel tubing and solid rod bracing for exceptional strength, as well as double bolted joints, which have been proven to be the most reliable method of joining tower sections for sturdiness and dependability. 

Each section of the tower is completely immersed in molten zinc during this process, allowing every square inch of the tower, inside and out, to be completely covered. 

Hot-dip galvanizing provides an attractive finish while protecting all points of welding and construction from rust and corrosion.

The majority of restrictions allow for a low ceiling height of 40 feet without the use of wires, anchors, or braces. 

While it might be a little pricey choice and might be a bit more difficult to install in comparison with other choices, as you can see, it comes with many advantages.

6. Heavy-Duty Tripod Base

Tripod mounts allow better reception and a more aesthetically pleasing appearance, which is provided by high-quality self-supporting antenna mounts that eliminate signal distortion caused by inferior materials.

If you live in an area where sunny weather is not a rare occasion, keep in mind that heavy-gauge, high-quality tubular steel uprights with the Sun-Coat process provide unrivaled strength, durability, and corrosion protection. 

One of the biggest perks of buying a tripod base is a quick and simple installation by a single person. Tripods come in a variety of sizes and are shipped fully assembled with no loose parts so they can be quickly installed at your location.

Tripod mounts have the advantage of being able to be mounted almost anywhere and can handle everything from the peak of a rooftop to a flat platform. 


You really can’t beat this price for an antenna mount, especially if you are hesitant to drill holes into your exterior, let alone your chimney.

The CM-2012 is easy to install, even if you have no one to help you, you can do all the work by yourself.

However, if you decide to handle it alone, be aware that it will be difficult to loop two flimsy metal straps around your stack (one at a time) and then hold them in place while you attach hardware, all while standing atop your roof and trying not to fall.

Many customers have said that even in the snowstorm the only problem was a small shift, so it is fair to say that WINEGARD CM-2012 has solid construction.

8. Universal Antenna Mount

On Amazon, the Universal Antenna Mount Adapter costs between $25 and $30. You do not need to worry about the angle if you’re planning to connect it to an existing pipe mount. It will work out best if you get it to a vertical position before assisting with the mounting.

If you are in an area where you want to be able to get Starlink, you most likely already have a satellite dish somewhere hooked up. You could also have a couple of satellite dishes, because when you switch to a new carrier, the new carrier never lets you use the same mounting brackets.

Successfully Installing Starlink Mount

The first step in a successful Starlink installation is to find a precise location free of obstacles. You can check for obstructions by using the Starlink app on your smartphone. You can determine the most suitable mounting location in three simple steps.

To begin, stand outside the area where you intend to install your Starlink. Next, scan the entire sky above you with your phone’s camera using the app. This will take you through Starlink’s entire field of view. To ensure the greatest amount of accuracy, stand still while performing this task. The test will not provide realistic results if you move around too much.

An obstruction is defined as anything that obstructs the view of the sky. This can range from as small as a utility wire to as large as an entire forest canopy. Regardless, the fewer obstructions in the dish’s field of view, the better the speeds, latency, and uptime you’ll be able to enjoy. Simply put, it’s worth the effort to get the installation right.


Can I Mount Starlink to the Roof?

If you have a suitable mounting location, the base that comes with your Starlink kit can be used as a permanent mount. For example, a flat roof with no obstructions.

Does the Weather Affect Starlink?

Starlink dishes use incredible technology that detects snow on the dish, heats up, and melts the snow, allowing it to slide right off. The only way the snow or rain can disrupt the connection is if heavy snow accumulates around the dish, obstructing its view of the sky.

Can you take Starlink with you if you move?

“Your Starlink has been assigned to a single cell. If you move your Starlink outside of its assigned cell, no satellite will be scheduled to serve your Starlink. Therefore, you will not be able to connect to the internet. This is geometry-constrained geofencing, not arbitrary geofencing.

Is the Amount Included With Starlink?

Your Starlink Kit comes with a base, which is ideal for ground-level installation or a quick test of your connection. Many customers use a permanent mount above ground level because Starlink requires a clear view of the sky to connect with the satellite network.

What Direction Does the Starlink Dish Point?

It depends on where you live, but Starlink dishes point north for people in the northern hemisphere. The dish has a nearly vertical angle, but it has a very wide field of view.

How Much Does Starlink Cost?

The cost of connecting to the internet via Starlink satellite has risen, with the latest pricing for the SpaceX service set at $110 per month, up from $99. Furthermore, the one-time hardware fee for Starlink’s receiver dish has increased from $499 to $599.

Final Verdict

Many customers use a permanent mount above ground level because Starlink requires a clear view of the sky to connect with the satellite network. However, purchasing Starlink mount options is always the better option.

It is difficult to say which option is right or wrong; it largely depends on your needs. You can choose between a Non-penetrating Roof Mount or a Tower Mount if you prefer to keep the roof untouchable; however, if solid construction is more significant to you, a J-Mount is your preferred option.

Hopefully, this review helped you in determining the right Starlink Mounting option for you.

More From Gear Fiction

Gear Fiction

Hello Friends! We, Rituparna Guha & Firan Mondal, are happy to present a lot of Gear Fiction articles. A lot of different varieties of gears have been covered here to take a decision for final selection. We hope you will enjoy our efforts and get benefits! Stay Blessed & Cheers!

Leave a Reply

Recent Posts